Taking apart an Aroma rice cooker is a relatively straightforward task which doesn’t require any specialized tools or knowledge. However, you should take care as some of the inner components can be fragile. The following steps provide comprehensive guidance on safely taking apart an Aroma rice cooker.
Gather the Necessary Tools
The most important tool for taking apart an Aroma rice cooker is a Phillips screwdriver. You will also need a pair of pliers for carefully disconnecting components. If your rice cooker has an electronic control panel, you will also need a handheld soldering iron.
It is also important to have a clean workspace to work on the rice cooker. Make sure to have a soft cloth or towel to place the components on as you take them apart. This will help to prevent any damage to the components and will also make it easier to keep track of the parts.
Unplug the Rice Cooker
Before starting the disassembly process, make sure to unplug the rice cooker from the electrical socket. It is important not to expose the internal components to electricity as this can cause short-circuiting or electric shocks.
If you are unsure of how to unplug the rice cooker, refer to the user manual for instructions. Additionally, it is important to ensure that the power cord is not damaged or frayed before unplugging the appliance. If the cord is damaged, it should be replaced before attempting to disassemble the rice cooker.
Disconnect the Inner Pot
Starting at the top, carefully detach the inner pot from the underside of the outer lid. You will likely have to unscrew the pot strap and its accompanying screws to completely disconnect it. Make note of the location of each screw so you can easily reassemble your rice cooker later.
Once the inner pot is disconnected, you can remove it from the rice cooker. Be sure to handle it with care, as it is likely to be hot. Place it on a heat-resistant surface and allow it to cool before attempting to clean it.
Remove the Outer Lid
Once the inner pot has been unclipped and unscrewed, you can remove the outer lid by unscrewing it counterclockwise. Make sure to hold onto the lid as you unscrew it – it will be heavy and can easily slip from your grip. Once you’ve unscrewed the lid, set it aside in a safe place.
Be sure to keep the lid away from any heat sources, as it can become damaged if exposed to high temperatures. Additionally, make sure to keep the lid away from any sharp objects, as the lid is made of a delicate material that can easily be scratched or dented.
Remove the Steam Tray
Underneath the lid, you’ll find a steam tray which controls how quickly steam is released from the cooker into the cooking pot. Unscrew the bolts or screws on either side of the steam tray and set it aside.
Be sure to keep the steam tray in a safe place, as it is an important part of the cooker and should not be lost or damaged. If the steam tray is not properly secured, it can cause the cooker to malfunction and lead to potential safety hazards.
Unscrew and Remove the Heating Element
The heating element is usually connected to two clamps at either end. Carefully disconnect these clamps with pliers and then unscrew the heating element using your Phillips screwdriver. Once the heating element is unscrewed, carefully lift away from its place in the rice cooker and set aside.
Be sure to take extra caution when handling the heating element, as it may be hot to the touch. If the heating element is too hot to handle, wait for it to cool down before attempting to remove it.
Separate the Control Panel and Power Cord
If your Aroma rice cooker has an electronic control panel, then you’ll need to use a handheld soldering iron to disconnect the power cord from its connection point. Once this is done, set the control panel and power cord to one side.
Detach and Remove the Inner Lid
The inner lid provides an airtight seal which keeps steam and heat inside the rice cooker while it is cooking. It is connected to four clips located at the top of the cooker. Carefully release these clips and remove the inner lid of your Aroma rice cooker.
Carefully Remove any Remaining Components
At this point, most of the components have been disconnected and removed from the rice cooker. All that remains are a few screws, clips, plastic components, and other miscellaneous parts that hold everything together. Carefully unscrew and disconnect all components, making sure to keep track of where each part goes.
Reassemble Your Aroma Rice Cooker
Once all components have been removed and set aside, it’s time to reassemble your Aroma rice cooker. Begin by reconnecting all electrical parts, making sure to securely attach any power cables. Next, attach each of the components onto their correct places in the housing, making sure to tightly connect each one. Finally, replace both lids and plug in the power cord.